How to assign IP address in Windows

Every operating system will assign IP address at the time of OS installation. If we want to set IP address as your wish, follow the below steps.

To check current IP address of your machine open Command prompt or PowerShell, then run ipconfig

C:\>ipconfig

Windows IP Configuration

Ethernet adapter Ethernet0:

Connection-specific DNS Suffix . : localdomain
Link-local IPv6 Address . . . . . : fe80::943e:8c29:89db:cd95%12
IPv4 Address. . . . . . . . . . . : 192.168.207.133
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.207.2

Tunnel adapter isatap.localdomain:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : localdomain

Tunnel adapter Local Area Connection* 11:

Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e76:88d:21c5:3f57:307a
Link-local IPv6 Address . . . . . : fe80::88d:21c5:3f57:307a%14
Default Gateway . . . . . . . . . : ::

How to assign IP address in Windows

How to assign IP address in Windows

1. Open the network connections by typing ncpa.cpl in cmd or Windows + R

2. Right Click on Ethernet, select properties.

3. Select Internet Protocol Version 4(TCP/IPV4) and click on properties.

4. Select Use the following IP address and enter the IP address. Then, click Subnet mask, It will be entered utomatically and select Use the DNS Server addresses and enter the Preferred DNS Server address.

Click OK twice

5. Verify by running ipconfig in command prompt or PowerShell.

Responses are currently closed, but you can trackback from your own site.

Comments are closed.

Powered by k2schools
%d bloggers like this: